Lighting fixtures sourcing in Foshan

Lighting fixtures sourcing in Foshan covers a wide range: residential fittings, commercial luminaires, and OEM/ODM work built to your drawing. Peter Zhang matches each line to verified factories and confirms the spec in writing before any deposit, so the fixture that ships is the one your project specified.

What we source

Three categories cover most buyer orders. Each is matched to factories that actually run that type, not a general lighting catalogue.

Residential lighting

We source ceiling, pendant, wall and downlight fixtures for homes and apartments. Finish, dimming type and colour temperature are confirmed against your schedule, because a residential order is usually mixed across many rooms and the spec has to stay consistent from the first unit to the last.

Commercial lighting

We source panel, troffer, high-bay and track luminaires for offices, retail and hospitality. The checks that matter here are output and the marks the destination market requires. When a lighting order is part of a larger fit-out, it can be matched to a furniture sourcing order so the two are specified and shipped together.

OEM and ODM

For private-label and custom work we run OEM/ODM from your drawing or sample, confirming tooling, materials and finish at the first-article stage before series output. The first article is the gate where dimensional and electrical drift shows up, so it is signed off before bulk production starts. When lighting is one line of a larger project, it can be sourced and consolidated with your building-materials order so everything ships as one lot.

What we check before shipment

Before a container is sealed, each luminaire is checked against the PO and the approved sample. The five checks below are the ones that decide whether a lighting shipment clears the destination and performs as specified. When you want an independent gate on top of the factory check, a pre-shipment inspection can be booked as a separate step. Who actually pays for that gate is agreed before the inspector is booked.

CE and RoHS mark verification

For markets that require it, we verify the supplier's CE and RoHS marks against the model actually shipped and ask for the test report on file — confirming the marking and the report cover the exact model and rating, not a generic family. We check that the declaration matches the item on the PO; we do not issue certification ourselves. Where a market needs a different mark, that requirement is confirmed on the PO before production.

Driver and light-source matching

We confirm the driver is matched to the light source and the rated input — the pairing that decides whether the fitting runs within spec and survives its service life. A driver that looks interchangeable in the sample but drifts in bulk is a common silent failure, so we check the driver model and rating, not just the housing.

Lumen maintenance and colour tolerance

We check the claimed output and colour temperature against the sample and the bin tolerance you specified. Colour shift between batches is the complaint that shows up after install, so the tolerance is confirmed per PO and recorded at inspection.

Die-casting and coating

For metal-bodied fixtures we check the die-casting for porosity and the coating for coverage and adhesion, because a weak housing or finish fails in the field long before the LED does. Surface and structural checks are part of the pre-shipment gate.

Wiring and earthing

We check internal wiring, terminals and earthing against the safety requirement for the destination market. This is the check that protects the end user and the brand, so it is verified on the finished unit, not assumed from the catalogue.

Timeline and cost

Production and shipping dates are confirmed on every PO and counted from deposit.

Fees: 8% of PO value on the first order, 7% on repeat orders — quoted in writing before you commit.

Minimums: no minimum on our service fee. Factory MOQ varies by item — we confirm it before you pay any deposit.

Quotations are issued within 8 working hours on business days.

FAQ

What lighting do you source?

We source residential fixtures, commercial luminaires, and OEM/ODM work built to your drawing from verified Foshan factories. Each line is matched to a factory that runs that type, with the spec confirmed in writing before deposit.

How do you verify CE and RoHS?

We verify the supplier's CE and RoHS marks against the exact model shipped and check the test report covers that model and rating, not a generic family. We confirm the declaration matches the PO item; we do not issue certification ourselves — the supplier's marks and reports are what we check.

Can lighting be consolidated with other orders?

Yes. When lighting is one line of a larger fit-out, it can be consolidated with a building-materials order and, where relevant, matched to a furniture sourcing order, then shipped as one container once every item has passed its check, including who is on site when the container is sealed. Consolidation is planned per PO.

Which markets do you serve?

We work with buyers in the Philippines, Indonesia, Australia and the United Kingdom as core markets, and take other markets on request. Reporting is bilingual, so you read the outcome in English while the factory acts on the same specification in Chinese.